Application Of Ultrasonic Cleaning Machine in Cleaning Carbon Deposition Of Automobile Engine Parts

Engine cylinder block is the basic component of automobile engine. Cylinder block is a separate part, in the assembly of the engine cylinder block is generally: cylinder liner, piston, piston ring, front end cover, rear end cover, connecting rod, connecting rod bearing tile, spindle, spindle bearing tile, spindle tile cover, thrust tile, front and back oil seal, oil pump, oil induction plug, engine bracket, detonation sensor... These parts can be cleaned by ultrasonic cleaning machine.

Car engine parts surface oil have carbon was normal, poor air quality, lack of oxygen, the incomplete combustion, road conditions cause shortness of (stop), the crankshaft forced ventilation (to put it bluntly no directly by air inlet filter ventilation), gasoline quality itself, DianPenChe involving characteristics (electronic control injection system of the vehicle itself is then easy to produce carbon), In this way, it seems that the process requirements of auto parts are still very high. In production, the surface and inner cavity of parts need to be decondified and cleaned, so that it can meet the requirements of particle size and cleanliness of the surface and inner cavity of parts. In the auto repair industry, fine cleaning is also needed to remove the parts of the thoroughly clean cleaning treatment, so it is more suitable to use industrial ultrasonic cleaning machine to clean engine parts, can achieve the purpose of fast, simple, no energy consumption, cost saving.

Current industrial parts cleaning, hope to be able to reach the surface, particle degree of the lumen, cleanliness, the requirements of the relevant generally kerosene on the workpiece is going to be used for cleaning, but clean with kerosene, is not only the problems of high cost, large consumption, as well as considerable effects on the environment, the body also has certain harm to operators. Ultrasonic cleaning machine can perfect to solve this problem, its cleaning principle is the use of ultrasonic physical cleaning and cleaning solution of chemical cleaning perfect combination, and can choose the ultrasonic frequency band and power density to achieve a variety of parts and components inside and outside the oil, carbon, glue and other dirt fully and thoroughly clean. So it is the best choice to use ultrasonic to clean the carbon accumulation of automobile engine cylinder body parts.